How do I make saline for wound cleaning?

Wound Wizard doesn’t give a saline recipe — how to mix something for an open wound is treatment guidance. Saline is usually supplied or prescribed, so ask what to use and where to get it. Don’t use alcohol, peroxide, iodine or antibacterial soap.

Wound Wizard won’t give you a recipe for making saline, and that’s on purpose.

Here’s how saline is used. For a wet-to-dry dressing, pour saline into a clean bowl. Place gauze pads and any gauze packing tape you’ll use in the bowl, then squeeze them out until they’re no longer dripping. For an open surgical wound, use a normal saline solution (salt water) or mild soapy water, soaked into gauze or a cloth, to clean the skin around the wound. For a stage II pressure sore, clean the area with salt water (saline) and rinse to remove loose, dead tissue.

All of those assume you already have saline, which in practice means it was supplied, prescribed, or you were told what to buy. So the question to ask is what to use and where to get it, not how to mix it.

A recipe is treatment guidance, and the sterility of anything going into an open wound matters. Guessing at a measurement would be the wrong trade.

Two things matter more than the recipe question. First, the wrong liquids do harm. Do not use skin cleansers, alcohol, peroxide, iodine or soap with antibacterial chemicals. These can damage the wound tissue and slow healing. For pressure sores, do not use hydrogen peroxide or iodine cleansers unless your provider tells you to, as they can damage the skin. Second, for minor wounds, plain soap and water is the recommendation: clean your wound with gentle soap and water.

So if you’ve run out, that’s a supply problem to raise, not a chemistry problem to solve. Ask what you should be using on your wound, and whether plain water or mild soapy water is OK until more arrives.

What to watch for

If you’re using wet-to-dry dressings, contact your provider for worsening redness, more pain, swelling or bleeding; if the wound is larger or deeper; if it looks dried out or dark; if the drainage is increasing or has a bad smell; or if your temperature is 100.5°F (38°C) or higher for more than 4 hours.

Treat this as a supply question and ask it before you run out rather than after. Two things to settle: what solution your wound should be cleaned with, and what’s OK as a stopgap if you run short. If you’ve already used peroxide, iodine or an antibacterial soap on the wound, say so — those can damage tissue and slow healing.

What we look at

  • What cleansing solution has been specified for this wound
  • Whether the patient has a reliable supply
  • Whether plain water or mild soapy water is acceptable for this wound
  • Whether any antiseptic has been used
  • Technique at cleaning, including rinsing and drying

Sources

  1. MedlinePlus — Wet-to-dry dressing changes: https://medlineplus.gov/ency/patientinstructions/000315.htm
  2. MedlinePlus — Surgical wound care, open: https://medlineplus.gov/ency/patientinstructions/000040.htm
  3. MedlinePlus — How to care for pressure sores: https://medlineplus.gov/ency/patientinstructions/000740.htm
  4. MedlinePlus — How wounds heal: https://medlineplus.gov/ency/patientinstructions/000741.htm